工藝工程師(光通器件)

工作職責：負責光通無源器件或模塊的光學組裝、測試?藝，產品有WDM或Switch, VOA可變光衰減器, TF可調濾波器Filter，MPO光跳線, 光模塊EDFA摻餌光纖放大器
任職要求：本科學歷，理?科專業，光、電、機械、?動化類專業佳；1年以上電?機械行業工藝工作經驗，光通行業佳；有良好工藝知識，有光學基礎佳，光模塊產品需良好的數電模電基礎；邏輯條理清晰，良好的溝通協調能力；工作積極主動，良好的異常分析解決問題能力，項目管理能力；CET, 英語口語可簡單交流流利佳。

職位概述：
Main Duty:
1維護生產線穩定運行，及時解決異常，保證訂單按時交付。
Maintain the stable operation of the production line, solve abnormalities in time, and ensure that orders are delivered on time.
2推動工藝持續優化（生產工藝、流程、夾治具等），提升合格率、效率、降低操作難度，降低報廢。
Promote the continuous optimization of the process (production process, process, fixture, etc.), improve the pass rate, efficiency, reduce operation difficulty, and reduce COPQ.


工作內容：
Work Content:
1按訂單需求準備制作工藝路線，制程要求、測試模板等。
Prepare process routes, process requirements, test templates, etc. according to order requirements.
2主導量產產品生產過程中的已知失效模式的分析、改善，及時解決生產異常。
Lead the analysis and improvement of known failure modes in the production process, and solve production abnormalities in time.
3熟悉工藝要求和關鍵控制點，對工藝關鍵控制點日常執行的審查確認，及時發現并糾正異常。
Familiar with process requirements and critical control points, review and confirm the daily implementation of critical process, and find and correct abnormalities in time.
4利用SPC監控合格率變化、失效模式變化，及時介入異常改善分析
Use SPC to monitor the abnormal of pass rate and failure mode, and timely intervene in abnormal improvement analysis
5針對Top3失效模式，指定改善計劃，持續改善。
Aiming at the Top3 failure modes, specify an improvement plan for continuous improvement.
6對關鍵失效/致命失效不良品失效分析，確認Root Cause，制定定改善措施
Conduct failure analysis on critical failures/fatal failures, confirm Root Cause, and output improvement measures.
7支持RMA產品FA分析，主導改善措施的制定和實施。
Support the FA analysis of RMA products, and lead the formulation and implementation of improvement measures.
8定期對生產、測試數據進行分析處理，關注工藝能力變化。如有異常，進行分析改善。
Regularly analyze production data and test data, and pay attention to changes in process capabilities. If abnormal, analyze and improve it.
9跟進樣品訂單/小批量訂單生產，整理分析生產、測試數據，輸出明確結論。
Follow up the production of sample orders/small batch orders, analyze production data and test data, and output conclusions.
10編訂和維護操作指導書、制程要求文件、測試模板和其他生產相關文件
Compile and maintain operating instructions, process requirements documents, test templates and other production-related documents
11定期對測試系統準確性（GRR或Golden Sample測試情況）進行確認。如有異常，進行分析改善。
Regularly analysis the accuracy of the test system (GRR or Golden Sample test conditions). If abnormal, analyze and improve it.
12排除生產工位、測試設備/系統的簡單異常。報告PE無法解決的軟件、系統、硬件、設備異常，尋求其他資源及時解決問題。
Eliminate simple abnormalities in production stations and test equipments/systems. Report software, system, hardware, and equipment abnormalities that PE cannot solve in a timely manner, and seek other resources to solve problems in a timely manner.
13對來料異常進行初步的分析和風險評估。
Preliminary analysis and risk assessment of incoming material abnormalities.
14主導ORT失效分析和產品風險評估
Lead ORT failure analysis and product risk assessment
15評審、考核員工相應崗位上崗資格
Review and assess the qualifications of employees for corresponding posts
16選拔技術員，對技術員進行工藝培訓，領導技術員協助PE進行日常工藝改進和項目跟進。
Select technicians, Technical training for technicians, and lead technicians to assist PE in process improvement and project follow-up.

MBM Pay Philosophy:
1. Total compensation for total contribution. 總體薪酬反映總體貢獻。
2. We pay individuals, not positions. 每位員工都為組織帶來了不同的視角、稟賦、技能、知識、經驗以及背景，我們因人付薪，而不是因崗付薪。